28254 Results for: "SeQuant+merck"

Supplier: Merck

ZIC®-pHILIC has the same stationary phase as ZIC®-HILIC, but is instead based on a polymeric particle for enhanced pH stability. The lack of silica practically nullifies background in high sensitivity detectors such as charged aerosol used for determination of organic and inorganic ions.

Supplier: Merck

ZIC®-cHILIC is based on the same technology platform as ZIC®-HILIC, but has a different functional group and an improved manufacturing procedure. The different charge orientation of the zwitterionic functional group leads to a different – and complementary – selectivity for polar hydrophilic compounds. This selectivity is especially beneficial for hydrophilic compounds that are negatively charged, positively charged, zwitterionic or neutral, for example, organic acids, amino acids, metabolites, aminoglycosides and nucleotides.

Supplier: Merck

The selectivity offered by ZIC®-HILIC is suitable for a wide variety of molecules containing hydrophilic or ionisable functional groups. This includes compounds such as carbohydrates, metabolites, acids and bases, organic and inorganic ions, metal complexes, amino acids, peptides, protein digests, plant and cell extracts, plus much more. Such compounds are normally characterised by a small or negative LogP value and have poor retention on reversed-phase columns.

Supplier: Merck

Ideal for preparing buffer solution according to WEISE for staining of blood smears.

Supplier: Merck

Specially developed screw caps for direct instrument connection of Merck S 40 threaded bottles ensure safe handling of solvents in the lab and protect human health, the environment, as well as solvent quality.

Supplier: Merck

SNAP i.d.® Basic Bundles, Merck

Supplier: Merck Millipore (Novagen)

BugBuster® Protein Extraction reagent is formulated for the gentle disruption of the cell wall of E. coli, liberating soluble protein. It provides a simple, rapid, low-cost alternative to mechanical methods such as French Press or sonication for releasing expressed target protein in preparation for purification or other applications. The formulation utilises a detergent mix that is capable of cell wall perforation without denaturing soluble protein.

Supplier: Merck Millipore (Novagen)

BugBuster® HT Protein Extraction Reagent combines BugBuster® Protein Extraction Reagent and Benzonase® Nuclease in one convenient reagent. BugBuster® HT eliminates common bioprocessing problems resulting from traditional cell lysis procedures. Soluble proteins are gently extracted from E. coli without exposure to heat or oxidative damage and viscosity is eliminated by nucleic acid digestion in a single step. The resulting protein extract can easily be fractionated by conventional purification techniques. BugBuster HT is ideally suited for application in high throughput protein purifications.

Supplier: Merck Millipore (Novagen)

BugBuster® 10X is a concentrated formulation of the proprietary detergents employed in BugBuster® without the addition of salts or buffer components. Concentrated BugBuster® provides a flexible alternative to the ready-to-use standard 1X BugBuster®, allowing user-defined dilution and addition of buffer components. BugBuster® 10X has all of the bioprocessing benefits of standard BugBuster® plus the freedom to control pH, reagent concentration, and buffer additives necessary for maximum extraction and activity of your target protein.

Supplier: Merck Millipore (Novagen)

BugBuster® (primary amine-free) Protein Extraction Reagent is a special formulation of BugBuster designed for applications where primary amines would interfere if present in the protein extract, such as protein immobilisation or cross-linking. The PIPPS buffer used in BugBuster® (primary amine-free) has a similar buffer capacity and pH range as the original Tris-buffered BugBuster®, but will not complex metal ions, also making it ideally suited for extraction of metal dependent proteins.

Supplier: Merck

UV/Visible spectrophotometer, Spectroquant®

Supplier: S.C.A.T.

The SCAT SafetyCaps provide maximum safety for your HPLC solvent supply. Extract your solvents safely from bottles and reservoirs without being exposed to hazardous gases and solvent vapours. Complete with integrated air valve for pressure equalisation.

Supplier: Merck

Drum Pump, Pressure reducer with integrated overpressure relief

Supplier: Merck

Spectroquant® test kits are suitable for use only in conjunction with Hach instruments. They do not require any further device-specific calibration.

Supplier: Merck

Spectroquant® Update cable for Move 100

Supplier: Merck

Sodium fluoride solution, 0.1 M, Supelco®, Application: ISE Calibration

Supplier: Merck

Compatible with many photometers and require no programming to measure the tests.

Supplier: Merck

Test kit, COD solution B, Spectroquant®, Range: 4 - 40 mg/l

Supplier: Merck

The kit contains a set of seven yellow colour reference standards (identified sequentially from Y1 to Y7) and a 1% hydrogen chloride solution in water. The solutions are produced from two primary metal salt solutions of ferric(III) chloride and cobalt(II) chloride, in accordance with chapter 2.2.2 ′Degree of colouration of liquids′ of the European Pharmacopoeia (Ph. Eur.).

Supplier: Merck

The kit contains a set of seven brownish yellow colour reference standards (identified sequentially from BY1 to BY7) and a 3.7% hydrogen chloride solution in water. The solutions are produced from three primary metal salt solutions of ferric(III) chloride, cobalt(II) chloride, and copper(II) sulfate pentahydrate, in accordance with chapter 2.2.2 ′Degree of colouration of liquids′ of the European Pharmacopoeia (Ph. Eur.).

Supplier: Merck

The kit contains set of brown(83951), yellow (83883), red (87448), greenish-yellow (82995), and brownish-yellow (86293) colour reference standards. The solutions are produced from three primary metal salt solutions of ferric(III) chloride, cobalt(II) chloride, and copper(II) sulfate pentahydrate, in accordance with chapter 2.2.2 ′Degree of colouration of liquids′ of the European Pharmacopoeia (Ph. Eur.).

Supplier: Merck

The kit contains a set of nine brown colour reference standards (identified sequentially from B1 to B9) and a 1% hydrogen chloride solution in water. The solutions are produced from three primary metal salt solutions of ferric(III) chloride, cobalt(II) chloride, and copper(II) sulfate pentahydrate, in accordance with chapter 2.2.2 ′Degree of colouration of liquids′ of the European Pharmacopoeia (Ph. Eur.).

Supplier: Merck

This refill pack contains all the reagents for the MQuant® test kit 1.18765 for the colorimetric evaluation of silicate. When the reagents of the MQuant® test are used up, the kit can be replenished by ordering the appropriate refill pack. Refill packs are available for a range of MQuant® test kits, making it a particularly economical system.

Supplier: Merck

The kit contains set of brown(92936), yellow (83967), red (95872), greenish-yellow (90269), and brownish-yellow (72666) colour reference standards. The solutions are produced from three primary metal salt solutions of ferric(III) chloride, cobalt(II) chloride, and copper(II) sulfate pentahydrate, in accordance with chapter 2.2.2 ′Degree of colouration of liquids′ of the European Pharmacopoeia (Ph. Eur.).

Supplier: Merck

These filters include multiple media: a graduated prefilter and a membrane filter for high throughput filtration of viscous or particle-laden solutions.

Supplier: Merck

Bcig X-Glucuronide (Merck 24858) 1 * 5 g

Supplier: Merck

SeQuant ZIC-cHILIC Guard 3MYm, 5 x 1 mm capillary guard column, 3 pieces 1 * 3 items

Supplier: Merck

SAFETY STAND FOR MERCK HDPE BOTTLES 1 * 1 items

Supplier: Merck

SeQuant® ZIC®-HILIC 3.5MYm,100a 150 x 2.1 mm PEEK coated HPLC column 1 * 1 items

Supplier: Merck

Merck columns come in three formats.