These 106,7 µm thick vinyl films with 20 µm adhesive layer are designed for temporary protection of samples in 96-well plates from contamination and evaporation.

• Protect samples and limit evaporation short-term
• Pre-cut flaps bend inward without fouling probes or tips
• Flaps close for continued protection after sampling
• Recommended temperature range −40 to +90 °C

A pre-cut pattern over each well separates the film into four flaps that bend inward easily when pushed by a robotic probe or pipette tip, allowing access to the sample without coring or adhesive fouling. The resilient flaps regain their original position after sampling for continued sample protection. For long-term sample protection after sampling, a continuous film should be applied as a second layer. Suitable for sealing all standard 96-well plates.

Each film L×D: 145,5×79,4 mm