Supplier: VWR Chemicals

VWR® TECHNICAL Vacuum oil for pump

Supplier: Merck

Grease, silicone, density: 1 g/cm³ (20 °C), flash point >300 °C

Supplier: VWR Chemicals

VWR® Chemicals silicone grease is a valve lubricant and sealant, often times used as a vacuum grease. It has good resistance to most chemicals, a wide service temperature range, low vapor pressure, low volatility and exceptional water resistance.

Supplier: Hettich

Lubricating grease for rotor trunnions

Supplier: Brady

Non-greasing maintenance spray for lock cylinders, office machines, tools, car locks.

Supplier: Thermo Fisher Scientific

High-vacuum grease is used as an anti-seize grease in ground glass joints and to lubricate synthetic and silicone rubber gaskets. Also used to lubricate water-treating equipment, laboratory equipment, lubricate O-rings on binoculars and telescopes and to prevent fogging of delicate lenses.

Supplier: Bohlender

Release and anti-blocking agent as well as lubricant for laboratory. Excellent gliding and separating effects.

Supplier: Thermo Fisher Scientific

Synthetic grease for joints.

Supplier: IKA

These certified standard silicone oils can be used to check the measurement accuracy of ROTAVISC.

Supplier: PanReac AppliChem

It is a purified mixture of semisolid saturated hydrocarbons having the general formula CnH2n+2 and is obtained from petroleum.

Supplier: M I MATERIALS

These Apiezon greases are hydrocarbon based, silicone-free and highly resistant to creep, the undesirable phenomenon associated with silicone-based products.

Supplier: M I MATERIALS

Medium temperature vacuum grease. Silicone-free. Used when a grease of higher melting point is required.

Supplier: Welch by Gardner Denver

This double distilled synthetic hydrocarbon oil designed for excellent resistance when pumping corrosive gases or vapors. A synthetic base stock that has no aromatic compounds or sulfur which accelerate varnishing, sludging and carbon build-up when pumps are used to pump corrosives.

Supplier: Welch by Gardner Denver

Use Labovac pump oils with Welch pumps to reduce oil change cycles and maximise performance. This warranty is only effective when using Welch qualified vacuum pump oils.

Supplier: Welch by Gardner Denver

A specially fractionated oil for DuoSeal® belt-driven pumps is designed to ensure the highest vacuum performance. The oil is tested to high vacuum levels to meet rigid requirements for vapor pressure, vacuum level stability, and viscosity. DuoSeal® oil is famous for its quality and consistency.

Supplier: M I MATERIALS

Apiezon N Grease exhibits extremely low vapour pressures at ambient temperatures, 6×10^-10 torr at 20 °C, which are further improved by reductions in temperature to the cryogenic region.

Supplier: M I MATERIALS

Used to seal joints and gaps and to effect temporary repairs. Good for sealing flat unground joints. Can be moulded by hand as it is a putty-like substance. For use at ambient temperatures.

Supplier: VACUUBRAND

Rotary vane pump oil, B
Rotary vane pump oil, B has excellent viscosity characteristics and low vapour pressure. Its exceptional chemical resistance, more stable behaviour when pumping oxidants, acid and alkaline vapours, and the fact that it is better tolerated on contact with skin, sets this oil apart from conventional mineral oils. Even after continuous operation for several weeks and months, the oil ensures the pressure is maintained constantly. Used for priming all RE/RZ series pumps.

Supplier: PerkinElmer

Oil for varian roughing pump

Supplier: DOW CORNING

Lubrication for control and pressure plug valves, water softener and faucet valves. Sealant for vacuum and pressure systems and outdoor equipment (also shipboard) subject to washing and harsh environmental exposure, such as meters, electrical service entrance and underground connections.

Supplier: DOW CORNING

This silicone-based clear translucent grey coloured compound is used as sealant and lubricant for vacuum systems.

Supplier: DOW CORNING

Molykote® High-Vacuum grease features a stiff, non-melting silicone formula that helps to seal and lubricate chemical processing equipment. Suitable for use in a wide range of applications including sealing vacuum and pressure systems, it is also doubles as a lubricant for o-rings in binoculars and telescopes as it prevents fogging of delicate lenses.

Supplier: PerkinElmer

Vacuum pump oil, Edwards 45

Supplier: Agilent

This coolant is equivalent to the PerkinElmer ICP-MS version.

Supplier: VELTEK ASSOCIATES

STERI-OIL 200 is a sterile mineral oil lubricant used for lubricating machinery in aseptic areas. The heavy consistency provides lubrication and prevents metal to metal contact, withstands high friction without displacement, and reduces metal fatigue.

Supplier: Borer Chemie

Silicone-free laboratory grease for sealing and lubricating fixed and rotary ground glass joints and for greasing fittings made of plastics and metall. Withstands vacuum conditions.

Supplier: Brand

Ideal for lubricating burette stopcocks.

Supplier: GLASS PRECISION ENGINEERING

Nuboid Waxes are high temperature lubricants for glass manufacturers and glassblowers.

Supplier: Brand

For greasing ground joints.

Supplier: Borer Chemie

Silicone-free laboratory grease for sealing and lubricating fixed and rotary ground glass joints and for greasing fittings made of plastics and metall. Withstands high-vacuum conditions.